How to build a construction site tent

1. Attach the top of the project tent, install the herringbone beam first, and then the drawing on the herringbone beam. Connect the herringbone

with a cross beam, then tighten the drawing with the flange, andCustom Aluminum Tents Manufacturer finally attach the large top tarpaulin to it and fix it.
2. Insert the vertical pole (side leg) at the joint of the crossbeam, insert the same on both sides, and then erect the ground beam tube.
3. Install the pole at the entrance so that the tent frame is installed, and then mount the mountain and wall cloth in place.
4. Install tent ropes and ground piles (so that the tent can be fixed), and then dig around the tent with soil to prevent water and wind from

entering the tent.